Origin |
China |
Model Number |
SC605 |
Brand Name |
sinosky |
Newest Car DVR Camera Recorder for Driving
A) Remove the base attachment to the camera placed on the base. Hole so that the side of the camera with a fixed deck deck hole corresponding to the base, screw cap with its connectivity. Adjust the corresponding angle, and then tighten the screw cap slightly (in order to adjust the position of the latter point of view).
(B) tear on the camera base double-sided tape, and then placed in the corresponding vehicle location (Note at this time not connected with the body), can be repeatedly opened by laser searchlights to be the key to determine the approximate position of recordings (in the press key under the laser searchlights opened, the spotlights will be issued a red laser light source, light-point position is shown in camera to record the center of the region), after adjusting the base pressure, close adhesion with the body.
(C) re-adjust the camera angle at this time, in the regulation of the process can be repeatedly opened by laser spotlights the key to accurately determine the position to be recorded. After adjusting screw cap tightened, the installation is complete.
2, the use of
(A) switch machines: fixed camera, long press the power key to open the boot; again press to shutdown.
(B) Power Supply: two ways:
(1) 3 AAA battery-powered;
(2) 12V DC power supply: 12V power supply through the cable interface connected with the vehicle power supply, power supply from motor vehicles.
(C) recording: Press the power key to open the machine open, and then press the record button to start recording. Flashing lights at this time the work that the machine is recording the image. Recorded file is stored on SD / MMC card.
3, output
Good programs to record through AV-OUT cable TV and so on and connected to the output terminal, when the recorded file will display on the TV broadcast.
Technical parameters
1, SIZE: 320 * 240 2, power consumption: 220mA 3, SD / MMC card: 128MB-2GB 4, File Format: AVI
Note:
(1) This camera is not preset memory, before recording, please insert an external SD / MMC card; largest 2G SD card can be inserted (2) recording mode for the cameras recording the cycle. When the storage medium or above, the camera automatically from the original storage medium to record the beginning of recorded content, and automatically overwrite the old document. (3) to re-record file, the machine will be formatted storage media. Therefore will have 1 ~ 2 seconds blind spots, that is 1 ~ 2 seconds to record the content from being recorded. (4) When the cameras in the work mode, low power indicator light flashes when less than that the machine power, the battery needs to be replaced.
Product use
1. To safeguard the legitimate rights and interests of drivers, for many people across the road and riding a bicycle, motorcycle on the road, or other illegal vehicles, the driver can provide effective evidence of their own, but also the "crash to help" deter ;
2. With the car video camera, will monitor the records of video playback, clearly responsible for the accident, the traffic police to deal with incidents quickly and accurately; can be evacuated quickly to restore the traffic, but also the effective time of the incident to retain evidence of the traffic flow to create a safe environment;
3. With the car video camera, the driver did not dare to exercise the regulations, a significant drop in accident rates, the vehicle will be other cameras take pictures of vehicles, traffic hit and run case will be greatly reduced;
4. The courts in adjudicating cases of road traffic accidents, in the sentencing and compensation will be more accurate and evidence-based, but also claims to insurance companies to provide the evidence
5. This product can also be used to drive out shooting scenery. DV can also be used to shoot at home, or home monitoring with
|